Wake up and breathe with this Ultrasonic aromatherapy diffuser.
- Auto off protection
- Anti corrosion
- USB connection
- Built-in LED light
- Advanced touch button
- Travel friendly
- Energy Efficient
Refer to the menu with your diffuser for instructions on its full function.
After using 5-6 times, or 2-3 days please clean the product
-Unplug the unit from mains supply and remove cover
-Pour out any remaining water from the “DRAIN SIDE” of the tank
-Unplug power cord from base of unit
-Put 1 tablespoon of citric acid in the water tank, add just under 80ml of warm water
-Leave for 5 minutes, and then drain solution from the “DRAIN SIDE” of the tank
-Wipe with a soft cloth. Avoid Ultrasonic Vibration plate area, which can be gently cleaned with a cotton bud.
-Do not fill over 80ml “MAX” at any time
-Do not switch on when the tank is empty
-Do not touch the Ultrasonic Vibration plate
-Clean regularly as per maintenance instructions to avoid malfunctions
-Always unplug from power source before maintenance
-For hygiene reasons, after use, pour away remaining water from “DRAIN SIDE” of tank and wipe with clean dry cloth.
-Essential oils can stain. In the event spillage of contact, please wipe away with a soft cloth
-Do not let mist blow directing sunshine heat source and air conditioners or fans
-Keep away from electronic equipment such as Tv and audio equipment
-Do not tip the product, this may cause water to enter the mechanism and cause malfunction
-Wait 60 mins before restart to avoid damage to Ultrasonic plate
-The amount and intensity of mist produced will vary, but this is not unusual and should not be considered as a fault
-Factors that affect this include water type, temperature, air currents
-Never move product in use
-Do not touch any part of product with wet hands
-Keep out of reach from children and pets. Also, children should be supervised not to play with the product. Appliance is not be used by children or persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
-Keep cord clear of path ways and do not pull forcefully at any point
-If smoke or burning is detected, unplug immediately.